Client to 614+ Print
Step 1 Log onto the DI-614+ configuration page (192.168.0.1 in your browser). Log in by entering your username into the login box (admin by default).

Step 2 Select the Status tab. Under Device Info, locate the LAN MAC address. This is the address you will enter into the configuration of the DWL-900AP+. Make sure you write it down correctly.

Step 3 Click on the Home tab and select Wireless on the left pane. Write down the SSID.

Step 4 Log into the configuration page of the DWL-900AP+ (192.168.0.50 in your browser). Log in by entering your username into the login box (admin by default).

Step 5 Select the Advanced tab. Under Mode, select Wireless Client. In the Remote AP MAC box you will enter the LAN MAC address that you copied from the configuration of the DI-614+. When entering the MAC address, do not include colons (:) or dashes (-). Click on the Apply button to save your settings. Click Continue.

Step 6 Click on the Home tab and select Wireless on the left pane. Enter the SSID as it is on the DI-614+ (case-sensitive). Click Apply and then Continue.

Step 7 Turn the DI-614+ and the DWL-900AP+ off for a few seconds. Turn the DI-614+ on first, wait until the lights are steady, then turn the DWL-900AP+ back on.

Step 8 The DI-614+ and the DWL-900AP+ should now be able to communicate wirelessly, if not, then verify the LAN MAC address you entered into the DWL-900AP+ configuration is correct.

Note: When the DWL-900AP+ is in client mode, other wireless clients will not be able to connect to the DWL-900AP+.
How can we improve it?
Note:
We do not reply to these comments. However, we do read them and use your suggestions to improve our site. If you would like to receive a response to a question please go to the Contacts page and select the appropriate department to contact.